Measurement

Bernoulli's Principle & Venturi Tube Fluid Simulator

Simulate incompressible fluid dynamics, continuity equation, Bernoulli pressure variations, dynamic vs static head, and manometer liquid heights through a Venturi constriction.

Free to use No sign-up Runs in your browser

Tool workspace

Working Fluid Presets

Venturi Geometry & Flow Parameters

Fluid Density (ρ, kg/m³)998.2 kg/m³
Inlet Pipe Diameter (d1, mm)100 mm
Throat Constriction Diameter (d2, mm)50 mm
Inlet Flow Velocity (v1, m/s)2.00 m/s
Inlet Static Pressure (P1, kPa)180 kPa
Throat Elevation Rise (Δh, m)0.00 m

Hydraulic & Aerodynamic Results

Throat Velocity (v2)8.00 m/s (×4.0)
Throat Static Pressure (P2)150.05 kPa
Venturi Pressure Drop (ΔP)29.95 kPa
Volumetric Flow Rate (Q)942.5 L/min
Mass Flow Rate (ṁ)15.68 kg/s
Total Stagnation Pressure (P0)182.00 kPa

Venturi Streamline & Manometer Tube Canvas

Particles accelerate through the narrow throat where static pressure drops dramatically (Bernoulli Effect), reflected by the lower liquid column in the manometer.

What is Bernoulli's Principle & the Venturi Effect?

Bernoulli's Principle states that for an inviscid, incompressible fluid in steady streamline flow, the sum of static pressure (P), dynamic pressure (1/2 ρ v²), and gravitational potential energy per unit volume (ρ g h) remains constant along any streamline: P + 1/2 ρ v² + ρ g h = constant. When a pipe narrows into a throat (Venturi tube), mass continuity (A1 v1 = A2 v2) forces the fluid to accelerate. To conserve energy, this increase in kinetic energy (dynamic pressure) causes a corresponding decrease in static pressure.

How to Use the Simulator

  1. 1Select a fluid preset (Water, Air, Seawater, Oil, Gasoline, or Mercury) to automatically configure fluid density ρ.
  2. 2Adjust the inlet diameter (d1) and constricted throat diameter (d2) using the interactive sliders.
  3. 3Modify the inlet velocity (v1) and static pressure (P1) to observe immediate changes in the throat speed and pressure drop.
  4. 4Watch the animated streamlines on the canvas: fluid particles speed up through the constriction, and the vertical manometer columns reflect the local static pressure heads.

Engineering & Aerodynamics Applications

Venturi Flow Meters & Orifice Plates

Accurately measure flow rates in industrial gas and water supply pipelines using differential pressure sensors across pipe constrictions.

Aviation Pitot-Static Tubes & Airspeed Indicators

Derive aircraft indicated airspeed (IAS) by taking the difference between dynamic stagnation pressure and ambient static pressure.

Carburetors, Atomizers & Eductors

Exploit throat negative pressure (suction) to entrain and aerosolize gasoline fuel or spray perfume without requiring an external pump.

Frequently asked questions

Why does pressure drop when fluid speed increases?

This is a direct consequence of the Work-Energy Theorem. For a fluid parcel to accelerate from slow speed v1 to high speed v2 as it enters a narrow constriction, there must be a net forward pressure force acting on it. Therefore, the pressure behind it (P1) must be higher than the pressure in front of it (P2), resulting in a lower static pressure in the fast-moving region.

Can static pressure drop below zero (vacuum)?

In absolute pressure terms, pressure cannot drop below zero. If the required Bernoulli pressure drop causes local absolute pressure to fall below the liquid's vapor pressure (e.g., 2.3 kPa for water at room temperature), the liquid boils instantaneously, producing vapor bubbles that collapse destructively—a dangerous phenomenon known as cavitation.

Does Bernoulli's principle explain aircraft wing lift?

Partially. Bernoulli's principle correctly describes that air flows faster over the curved upper surface of an airfoil, causing lower pressure on top than on bottom. However, this is coupled with Newton's Third Law: the wing exerts a downward force turning the oncoming airflow downward (downwash), and the reaction force pushes the wing upward.